Perlove PLD7600J(85KW) Ceiling suspended Digital X-ray machine (Dynamic Detector)

The Perlove PLD7600J (85 kW) is a ceiling-suspended digital radiography (DR) system with a dynamic flat-panel detector, manufactured by Nanjing Perlove Medical Equipment and supplied in the Philippines by Medisense (Osyali Construction & Trading, Inc.). The X-ray tube assembly is mounted on a ceiling rail gantry rather than a floor column, freeing floor space and allowing the tube to travel across the full examination area. It is intended for hospitals, diagnostic imaging centers, and radiology departments that perform general radiographic, fluoroscopic, and angiographic imaging across a range of patient positions.

Key features and specifications

• Configuration: Ceiling-suspended (overhead rail) gantry with motorized tube travel and a wall-mounted (Bucky) stand.
• High-voltage generator: High-power high-frequency generator, configured at 85 kW.
• Dynamic flat-panel detector: 139 µm / 100 µm pixel pitch dynamic detector supporting image capture at up to 30 frames per second.
• Static radiography: Up to 18 million effective pixels with spatial resolution up to 3.7–5.0 lp/mm.
• Imaging modes: Digital radiography, digital fluoroscopy, and digital angiography.
• Two-way automatic tracking: The X-ray tube and detector track together automatically in both directions, with automatic focusing on the detector.
• Control: 10.4-inch touch-screen control system with an intelligent acquisition workstation and measurement tools.
• Radiation dose management: Optional automatic exposure control (AEC) and DAP (dose-area-product) monitoring that records the dose of each examination.
• Optional functions: Auto collimator, automatic image stitching (long-length imaging), and standardized dual-grid support.
• X-ray tube: High heat capacity with high-speed anode rotation for sustained workflow.

Table and positioning

• Two Bucky table options: mobile type and lifting (height-adjustable) type.
• Lifting table lowers to a minimum height of approximately 56 cm for easier patient transfer.
• Flat-panel detector center can be positioned a minimum of approximately 35 cm from the floor.

What is included, installation & service

A standard configuration comprises the ceiling-rail X-ray tube gantry, the high-voltage generator, the dynamic flat-panel detector, a wall (Bucky) stand, a Bucky table (mobile or lifting), and the acquisition workstation with touch-screen control. As a ceiling-mounted system, the PLD7600J requires a prepared imaging room with adequate ceiling height and structural support for the overhead rails; manufacturer guidance suggests a room of roughly 25–35 m² with a ceiling height of at least about 2.8 m to accommodate gantry travel. Medisense provides delivery, site planning, professional installation, operator orientation, and after-sales engineering support in the Philippines, including preventive maintenance, calibration, repair, and spare parts. Final configuration, accessories, and specifications should be confirmed on quotation. This device is distributed in accordance with applicable Philippine FDA requirements.

Supplied by Osyali Construction & Trading, Inc., an authorized Perlove distributor in the Philippines. Installation, training, and after-sales service available.